Merkez
Web Site
Faaliyet Alanı
-
Aktif Üyelikler
Fıdan Pnömatık Hıdrolık Tesısat Malz. Otom. Ith.
| Component Parts and Materials 1 Technopolymeric Body 2 Nickel-plated brass Body 3 Acetalic resin Collet 4 Nickel-plated brass Capsule 5 Steel aisi 301 Clamping washer 6 Technopolymeric Safety ring 7 NBR Lip seal 8 NBR O-ring 9 NBR Thread packing |
|||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Connection Tubes | Plastic tubes: PA6 - PA11 - PA12 - Polyethylene - *Polyurethane - PTFE - FEP - ecc. *For Polyurethane hoses it is required a minimum hardness of 98 shore |
||||||||||||||||||||||||
| Temperatures | Minimum Temperature: -20 °C Maximum temperature: +80 °C |
||||||||||||||||||||||||
| Threads | "Short" taper thread Parallel gas in conformity with ISO 228 Class A Metric in conformity with ISO R/262 |
||||||||||||||||||||||||
| Pressures | Minimum pressure: -0.99 bar (-0.099 MPa) Maximum pressure: 15 bar (1.5 MPa) |
||||||||||||||||||||||||
| Fluids | Compressed air Vacuum |
||||||||||||||||||||||||
| Sizes | Tube: from 4 up to 14 Thread: from M3 up to 1/2 |
||||||||||||||||||||||||
| The 55000 series has been produced using innovative material such as last generation technopolymeric. Thanks to the use of these new materials, we've been able to realise very light and safety fittings. The use of thechnopolymeric fittings ensures to avoid dangerous eletrical phenomena and in case of overpressure there won't be any formation of splints. This is thanks to the materials features, they are ductile and not conductive. |
|||||||||||||||||||||||||
| The washer, made in stainless steel, ensures the perfect tube clamping with every kinds of materials without damage the surface. The connection between the tube and the fitting ensures a total tightness even in severe conditions such as impact and vibrations. The particular geometric shape of the seal ensures the perfect tightness even with vacuum. |
|||||||||||||||||||||||||
| All of threads from this range (also the M3), have been equipped with tightening parts which allow the direct assembly of the fittings, reducing the installation time. | |||||||||||||||||||||||||
| All the straight fittings, with "short" and parallel threads, can be assembled with Allen wrench and it is possible to use them in reduced spaces. | |||||||||||||||||||||||||
| The "short" taper thread has been designed to offer the following advantages to the users: - reduced overall lenght - smaller hex dimension compared to the parallel threads - to allow the assembly with different female threads both taper as well as parallel: - tapered NPT - NPTF - parallel ISO 7 - BSPP - tapered ISO 7 - BSPT PT - parallel ISO 228 - BSP - PF |
|||||||||||||||||||||||||
| - to ensure the right tightening also with surfaces not perfectly flat, without spot-facing, concave, convex and with different kinds of chamfers or radius. | |||||||||||||||||||||||||
|
|||||||||||||||||||||||||
|
|||||||||||||||||||||||||
