Product Description: Atmosphere gas is absorbed by the movement of the piston to the lower dead point, cleaned in the dry air filter and passed through the intake valves, and is compressed by the discharge valves with the movement of the piston to the upper dead point. The reciprocating compressor head block is driven by the electric motor belt-pulley system. Reciprocating compressor oils specially produced by tried-and-tested brands for the lubrication of the head block, between the pistons and cylinders and of the crank main and bearing bearings are lubricated by the impact lubrication system by means of the lubricating rods in the connecting rods.

PRODUCT FEATURES

If the compressor is single-stage, the compressed air pressed by the discharge valves is first collected with the help of a collector and then passed through the check valve system and directed to the air tank. The check valve before entering the tank prevents the return of the compressed air in the tank. In addition, the evacuation of the compressed air remaining on the collector and pistons at the time of stop is done with the help of pressure automatic in some types and with the help of solenoid valves in some types.

If the compressor is double or triple stage, the air pressed by the low pressure stages is then transferred to the second or third stages by the intercooler system, and then collected in a collector again, passed through the check valve, and directed to the air tank.

The water vapor in the atmosphere gas, which condenses naturally in the tank, is then discharged with the water discharge valves under the tank. In this way, the air that has been held in some moisture will be made available for use. In addition, a compressed air dryer can be used after the compressor in enterprises with high system humidity and water disturbance.