CHASSIS

It is manufactured from high-strength steel, designed in accordance with its intended use and carrying capacity, with “I” section, from automatic gas metal arc welding machines. The chassis is supported by cross-members NPI crossmembers.

STUPID

3 axles with a carrying capacity of 14-16 tons are used.

Brake pads complying with TSE norms are used.

SUSPENSION

Spring System Suspension, Z Spring

BRAKE SYSTEM

WABCO Brand EBS 4S 3M – Double line brake system conforming to EU norms. WABCO products are used in the braking system. It is equipped with Automatic Brake Ratchets, Emergency Boots, Service Brake Boots (30's), Brake pads. There are two WABCO Brand filters (red and yellow) replaceable and shielded Air Caps at the front of the trailer. The air required for the brake circuits is provided by the E-certified air tank.

SUPPORT FEET

Double-speed mechanical feet, each with a carrying capacity of 24 tons

TYRE

12+1 Pieces, 275 70R 22.5 Tubeless Pirelli Brand Tires (Brand Optional)

12+1 Pieces, Jantsa or Jantaş Brand

Trailer platform is covered with tire.

BASE

The middle part of the platform is made of flat sheet metal, and timber is mounted on the sides.

KING PIN

Made of forged steel, resistant to high stress and rupture in accordance with SAE / DIN norms, practical replacement thanks to screw connections

CAMEL NECK

Fixed Type Jumbo Gooseneck, 500 mm high cover is mounted on the front and sides of the gooseneck.

TRAILER DIMENSIONS

Width 3.050 mm – 3.200 mm upon customer request

Platform Length 9.500 mm varies according to the intended use.

Total Length: 13.500- 14.500 mm varies upon request.

RAMP SYSTEM

Pneumatic or Hydraulic Ramp System (Optional)

PARK BUTTON

1 parking button is installed.

ELECTRICAL INSTALLATION

It complies with SAE standards and TÜV general regulations.

On the side platforms, at appropriate intervals, Kırıntı SABA Brand traffic warning and lamps, SABA Brand Signal Lamps

Rear 2 SABA Brand License Plate Lights, 2 SABA Brand Stop Lights,

It is taken from the electric vehicle with a 7-pin socket.

3M Stripe Reflective

PAINT

After all the surfaces of the trailer are completely cleaned, it is painted with 2 layers of epoxy primer and the last layer of DYO acrylic paint.

Color will be determined according to customer request.

ACCESSORIES

1 Locked Tool Crate

Load lashing eyes at intervals suitable for trailer side platforms

1 Spare Wheel Place

1 Long and Wide Vehicle Text

2 Reflectors

OPTIONAL FEATURES

Optional tire brand

Wheel brand on request

European axle group on request

double spare wheel carrier

RAL color codes upon request

Ramp System