Industrial Treatment
What is Industrial Wastewater?

Waste water originating from the processing of raw materials and production of products in industrial wastewater treatment plants is called “industrial wastewater”. These wastewaters may be caused by washing, cooking, heating, reaction products, separation, transportation and quality control processes in industrial facilities, factories, organized industrial zones. While biological treatment alone is sufficient for the treatment of domestic wastewater with low pollution value, the biological treatment process to be applied to wastewater alone is not sufficient because the pollution value of wastewater is high in industrial wastewater treatment. Therefore, in industrial treatment, the treatment process is carried out by choosing the appropriate ones from the following options, depending on the content of the wastewater. You can contact us about industrial purification.

​Physical Refinement
The physical treatment process, which is accepted as a pre-treatment in the treatment of industrial wastewater, is the removal of solid particles, oil wastes, floating and collapsible particles in the water from the system with mechanical equipment such as screens, screens, sand traps and oil separators.

Chemical Treatment

The most effective method used in the treatment of industrial wastewater is chemical treatment. Pollutants dissolved in water that cannot be removed from water by other methods can be easily separated from water by chemical treatment processes. The processes applied in chemical treatment are coagulation, neutralization and flocculation.

coagulation
Coagulation process; It is to increase the particle size of the chemicals with coagulant properties dosed into the waste water and the colloidal and suspended solids in the waste water and make them ready to form flock.

Neutralization
Neutralization process; It means balancing the pH value of acidic or basic wastewater with chemicals added to the water. By balancing the pH value of the waste water, both the discharge standards of the waste water to the receiving environment are ensured, and if the biological treatment process will be applied to the waste water after chemical treatment, the appropriate value will be provided for the bacterial activities to take place.

Flocculation
Flocculation process; It means that the substances, which are made ready for flocculation by increasing the particle size by the coagulation process, are combined with the appropriate chemicals added to the water to form flocs and precipitate. After the precipitation process, the chemical treatment process is completed.

Biological Treatment
It is the process of breaking down the pollutants in the waste water by microorganisms and converting them into water, carbon dioxide and new microorganism cells. (You can view detailed explanations about biological treatment in our services - biological treatment section.)

​Advanced Treatment
It is the removal of the pollution load, which cannot be removed sufficiently after chemical and biological treatment processes, by going through a series of filtration processes.

Some Sectors We Serve as TT Treatment Systems

Milk and Dairy Products Facilities
Slaughterhouses and Integrated Meat Facilities
Oil Refineries and Similar
Iron-Steel Production, Galvanizing plants
Metal preparation and Processing Plants
Solid Waste Processing, Recovery Facilities
Textile Processing Plants etc.
​ ​
In industrial treatment, the terms wastewater treatment and wastewater softening are often confused. Waste water treatment is obtained for people's drinking water needs and sold. Water purification components are used to obtain water that is suitable for people's health and taste. Water softening occurs with a pure water purifier. This event is mostly used in industrial sections, not in homes.

As it has been learned, many production devices with advanced technology work with aqueous systems and water is constantly used within the devices.
In production devices that constantly pass through the lines inside the devices, the materials in the water within a certain period of time can cause more than one problem.
In order to eliminate the problems caused by this event, a pure water purifier should be preferred.
​ ​

Industrial purification is a process carried out to convert drinking water into purer water. For this purpose, instead of water treatment devices used at home, factory-type large facilities are installed. In order to treat wastewater, it needs to go through many different stages. Because the amount of water to be treated is very large.
Water Softening
With the help of machines with water softening, advanced filtering and systems technologies, the water we know as normal is brought to pure water quality, that is, softening systems are used. Unlike cleaning devices, it is among the details that do not go away from attention that chemical processes can also be applied within the devices used to reach pure water. In order to have all these systems at good prices and to benefit from the after-sales services, it is strongly recommended to log in to the Royal Green web page and analyze the products. Contact us immediately for industrial water treatment systems. Drinking water supply has always been an important topic.

​Industrial Water Treatment Companies

Industrial water treatment companies are the types of companies you need for industrial treatment. Cleaning of wastewater causes the elimination of negative effects on both the environment and human health. They use filtration systems during this process.

Activated carbon filters, which are used in industrial treatment processes or in water such as well water, are generally used to remove organic compounds in wastewater or to separate free chlorine from water. Thus, the use of water in manufacturing processes is made suitable. Removing organic substances normally found in potable water, such as humic acid and fulvic acid, in wastewater greatly prevents the chlorine in the water from reacting chemically with acids, thereby forming trihalomethanes, a known class of carcinogens.