main structure

3600 mm wide 60.000 kg Workplace workplace area 6500 mm Its height in the form of a pool is 850 mm.

Material

It will be manufactured from ST 52 Eregli Iron and Steel sheet.

Main frame and Gooseneck

Under-chassis welded with I-section through gas metal arc welding.

Chassis lower and upper blades 20 mm middle strut plate 16 mm abrasion resistant sheet intermediate reinforcements ST 42 260 NPI longitudinally interlaced

Gooseneck is of the same material and properties.

Vehicle Capacity

Vehicle capacity spring load 60 tons

Flooring

The trailer will be covered with 3.4 mm checkered plate. 8 cm thick hornbeam planks will be placed longitudinally.

Undercarriage

2 axles resistant to heavy tonnage, (axle) Tandem type axles will be used

Axle Tops

It is welded with 50x16 blades to prevent machine slippage with open and pool.

Brake system

Automatic brake ratchet with air system and emergency bellows.

Ramp System

air ramp super piston

tires

295 60 R 22.5 16+1 E certified rims will be fitted.

Electrical Installation

In European Norms and Standards, 3 wedge lamps on each side and 2 on the back

Wide stop is connected and 2 license plate lamps are mounted.

Paint

1 coat of epoxy primer and 2 coats of topcoat acrylic auto paint will be painted in the color and pattern desired by the company.

Accessories

Effective reflector will be attached to the team chest and night visions. On the gooseneck, spare wheel, 9+9 expansion flags and 24 volt lighting lamps with E certificate will be installed.