main structure

Trailer with 2 axles Tandem arm has a carrying capacity of 40 tons and behind the goose neck 9500 mm Workplace (width 3200mm) Suitable for palletized construction machine, roller and paver transport

Material

It will be made of ST A1 52 steel sheet.

The lower and upper blades of the main chassis are in the form of 20 mm middle strut 15 mm I-section and are welded by gas metal arc welding from one end to the other. The camel neck is used from the same material. Intermediate sleepers are made of ST 37 specially cut twisted sheet

Vehicle Capacity

Spring load 40 tons firm guarantee 50 tons

Flooring

Between the two chassis 8 cm plank and chassis to the sides, 3,4 checkered sheet will be covered.

Undercarriage

2 axle heavy tonnage resistant tandem type

Axle Tops

It has a closed flat platform and is welded to a 40x10 blade to prevent the machine from slipping.

Ramp System

With hydraulic ramp system

tires

2 axles will be equipped with 8+1 tires and appropriate rims. Tires E certified brand with prell 275 70 R 22.5

Electrical Installation

In accordance with TSE in European norms and standards

Accessories

2 rear overlay ramps are hydraulic and there are tie-down rings to the reflector gooseneck assembly and the tool box to the sides. Chassis label and chassis number will be written on the appropriate place of the chassis.

Paint

1 coat of primer 2 coats in the color and pattern desired by the company