Chlorination should be applied in water tanks or water pipes in municipalities, towns, villages, sites, pools, institutions with their own drinking or utility water system. The chlorine requirement to be used varies according to the flow rate of the water. Chlorinators are designed to adjust the chlorine exchange in the water according to the need. Manual and automatic models are available.

Electric Chlorinator: Electric Chlorinator; According to the determined number of shots, liquid chlorine is thrown into the tank or line and dosing automatically. It has an electromagnetic proportional dosing pump. This pump takes a command from the water meter (flow meter), which is connected to the water line and gives a certain signal, and dosing depending on the flow passing through the line.

Solenoid dosing pump with manual 1/5 capacity adjustment, 100-240(12-24) V, 50-60 Hz multivoltage, IP65 protection, 2x1.5 m PVC suction and PE discharge hose, suction filter and injector, suitable for wall mounting.

Disinfection with chlorine is one of the most widely used and most effective methods in the treatment of drinking and utility water.

Automatic chlorine dosing pumps should be used to ensure legally continuous and regular residual chlorine level in drinking water.

- Chlorine etc. The ideal solution for the precise pumping of small volumes of liquids. Easy, practical, flexible installation and use.

- Long-lasting, economical, maintenance-free and inexpensive ...

Solar powered dosing pump application is the most economical, economical and inexpensive solution in places where there is no mains electricity or where electricity transportation is far or costly.

Chlorine dosing pumps working with solar energy, in principle, work with sunlight / daylight. It can operate safely even if there is no daylight for 2-3 days in closed weather... Chlorine dosing pumps working with solar energy are used in warehouses where there is no electricity. It is applied as a complete set with solar panel, regulator, chlorine dosing pump, liquid chlorine tank, electrical panel. Since the systems are applied to the tank, dosing pumps are operated without pressure. Disinfection systems with chlorine dosing pump applied at non-pressure points work without any malfunctions and for a long time.

Economic solution for non-network water tanks and irrigation systems from the sun; As it is known, it is now easy and economical to produce electricity with solar energy with photovoltaic pv modules called solar panels, solar cells, solar panels. Moreover, there is the possibility of practical application. The system, including automatic solar chlorine dosing systems and chlorine sensor, works with solar energy in villages, towns, settlements, water tanks away from lines and mains. Especially in village water tanks, chlorine dosing systems working with solar energy have sensors and automatically injects chlorine into the water when the chlorine in the water is gone. The solar-powered chlorination system cleans the waters of the villages and ensures a healthy life for the citizens. The waters of the villages and villagers are now cleaner and under control. In this way, the waters of the villages are purified from unhealthy conditions. By placing a chlorine tank, battery, pump and probe controlling the movements of the pump in the tanks, the waters of the villages are cleaner and healthier. Solar-powered automatic water chlorination systems can operate uninterruptedly and independently, 7 days a week, 24 hours a day, spring summer autumn winter four seasons, without the need for power lines, cables, installations. You can always operate solar cell technology, solar energy, solar energy applied chlorination pumps, dosing pumps in every region of our country, including rainy, snowy, cloudy, foggy closed weather. Renewable energy, environmentally friendly, clean energy.

First of all, we generate electricity with solar energy. Electricity comes from solar cells, we make the incoming electricity suitable for the charging of our batteries with a device called solar charge controller, solar charge controller. We feed and operate the necessary equipment with the energy we store in the batteries. a) If all of the units to be operated are direct current and 12 volt dc voltage, we can connect them directly to the battery. b) If the chlorination and dosing system to be operated is 220 volts ac voltage, we first connect 1 suitable dc / ac inverter to the output of the batteries. Thanks to the power inverter, we provide the 220 volts pure sine wave electricity we need.

In order for the system to work in a healthy, uninterrupted and 4 seasons, first of all, the projecting and design phase is very important. In the follow-up, we have to choose a solar panel, battery charge controller, solar battery / solar battery and sine inverter with suitable and sufficient capacity. It is necessary to place the mentioned electrical materials in the panel according to the field characteristics of the place where the application will be made. Necessary breaker, fuse, input-output connection, on-off and electrical warning mechanism should be present in the same panel. It is very important to install solar cells with the appropriate angle and direction. It is possible to provide electricity for many years in designs that pay attention to these issues. It is obvious that thanks to the solar system electricity supply, there will be no cost of electricity lines, network subscriptions, meters, installation infrastructure maintenance and operation personnel for long kilometers, so a serious economy will be provided. Also, without being affected by interruptions, disasters, earthquakes, etc. even under extraordinary circumstances; You can generate your own electricity from the sun, independently and independently, for free electricity, without paying electricity bills every month, without being affected by electricity price hikes, anywhere, anytime.

Since solar chlorine dosing systems use the sun's rays as an energy source, it is one of the preferred systems in rural areas, villages and places where there is no electricity, such as non-electric chlorine dosing systems. However, since solar chlorine dosing systems need sunlight, in the selection of these systems; Factors such as the geographical location of the place to be used, climatic conditions and the duration of light exposure are effective.

Solar powered chlorine dosing systems consist of the following parts:

STANDARD SYSTEM EQUIPMENT:

• Chlorine Dosing Pump

• Power source

• Control unit

• System Dashboard

• Polyethylene Chlorine Preparation Tank

• Liquid Chlorine (15% Concentration)

• Solar panel

OPTIONAL SYSTEM ACCESSORIES

• Level Sensors Control System

• ORP Electrode (system that automatically measures the amount of chlorine in the water and dosing according to the measurement result-optional)

• Insulation box for winter conditions

Solar energy panels are positioned to receive the sun's rays in the best and longest time, and energy is produced. The energy produced in the solar panels regularly feeds the battery with a constant voltage thanks to the charge regulator. On the other hand, the inverter converts the 12 V energy in the battery to the 120 V energy required to operate the chlorine dosing system. Dosing pump makes chlorine dosage proportionally to the system by making suction from the chlorine dosing tank. Chlorine dosage adjustment is made with the adjustment button on the dosage pump, as in the electric chlorination system. In general, "solar energy chlorination" systems are used to chlorinate the tanks located at points where it is costly or impossible to draw electricity. These systems run a specially designed low-power chlorination pump with the help of batteries that they charge with solar energy throughout the day.