1-FEATURES:
Contents:Plas'coll Exterior Primer is a synthetic emulsion-based, water-resistant, intermediate material that can evacuate the moisture inside with its breathability.
Where Used:
Colors: Although our main production color is white, colored lining can be made optionally.
Packaging: Plas'coll Exterior Primer is launched in 20 Kg packages.
2- BEFORE APPLICATION:
Surface Preparation: All kinds of oil, dirt, rust, etc. on the surfaces to be applied. should be free of problems.
Product Preparation: Plas'coll Exterior Primer is diluted at various rates according to the absorbency of the surface and made ready for application.
Application Tools Preparations: The application is done with a roller and brush.
3- APPLICATION:
Application Method (or Shapes): Plas'coll Exterior Primer , which is ready for use, is applied to saturate the surface, prevents the surface from absorbing and prepares a solid surface for the paint.
Matters to be Considered: The temperature limit during application should not be less than +8 degrees and it should not be worked under very hot sun.
4-AFTER APPLICATION:
a) Drying Time: First drying: 15 minutes
Final drying: 1 hour
Storage of the Product: The material should be stored in places above zero degrees.
Storage of Application Tools: Application tools and equipment should be washed and cleaned with water at the end of the work.
5-CONSUMPTION (CONSUMPTION):
The consumption of Plas'coll Exterior Primer , which is applied under the plasters diluted with water at a ratio of 1/1 by volume, is 0.250 kg/m2.
- Plas'coll Exterior Paint
1-FEATURES:
a) Contents: Acrylic copolymer emulsion based matte exterior paint.
With its high quality special acrylic binder, it provides long-term protection of all kinds of structures against external influences in very different climatic conditions, and provides facades to gain a contemporary and aesthetic appearance. It shows excellent adhesion to all kinds of surfaces, does not crack or peel, and does not fade colors. After completing its drying, it is not affected by water, it allows the moisture on the wall to be thrown out with its breathing feature.
b) Places of Use: It can be used on exteriors of all kinds of buildings as well as interior spaces where decorative appearance is desired. It is applied on plaster, concrete, prefabricated elements, plaster and chip surfaces and old painted solid surfaces.
c) Colors: White and 15 pastel colors.
d) Packaging: Plas'coll Exterior Paint is launched in 20 kg packages.
2- BEFORE APPLICATION:
- a) Application Preparations: The surface to be applied should be primed with one layer of “Plas'coll Exterior Primer” and the floor should be prepared for application.
- b) Floor (surface) Preparation: Plas'coll Exterior Paint Paint should be free of dirt, oil, dust and all kinds of loose, swollen surfaces and should be at a sufficient moisture level.
- c) Product Preparation: Plas'coll Exterior Paint should be thinned 50% for the first coat and 5% for the second coat, and made ready for application.
- d) Preparation of Application Tools: The application should be done with a brush or roller.
3- APPLICATION:
a) Application Method(s): The product, which is ready for use, should be applied every 1-2 hours.
b) Considerations: "Using tape" in the application of different colors and wide facade applications prevents joint and color problems.
4-AFTER APPLICATION:
a) Drying Time: Full drying is provided in 24 hours.
b) Storing the Product: The product should be stored above 0 degrees and the paint box should be stored upright.
c) Storage of Application Tools: At the end of the work, the application tools and equipment should be washed and cleaned with water.
5-CONSUMPTION (CONSUMPTION):
With 1 Lt Plas'coll Exterior Paint, an area of approximately 9 m2 is painted as a single layer, depending on the surface.
TS 5808
- Plas'coll Ready Color Plaster
1-FEATURES:
a) Content (Ingredients): It is an emulsion-based, synthetic resin binder that does not contain lime and cement in its composition, and is suitable for all climatic conditions.
b) Places of Use: It is used in interior architecture due to its decorative feature. It is applied on smooth and solid surfaces such as thin plaster, eternit, chipboard and duralite. It has high insulation and breathing ability. Does not form mold. It is not affected by sunlight, acid, detergent and soda compounds. Due to its expansion feature, it prevents the capillary cracks in the lower plaster from spreading to the outer surface.
c) Colors: There is a special catalog of 12 pastel colors.
Apart from the catalog colors, it can be made in special colors depending on the quantity.
d) Packaging: Plas'coll Trasit ready-to-use colored plaster has been put on the market in 30 kg packages.
2- BEFORE APPLICATION:
a)Application Preparations: Before the application, “Plas'coll Ready Color Plaster Primer” diluted with 1/1 water on a dry and clean surface should be applied with a brush or roller.
b) Floor (surface) Preparation: The surfaces to be applied must be cleaned of dirt, oil, cracks and roughness.
c) Product Preparation: After opening the package, it is mixed until it becomes homogeneous. If necessary, water is added.
d) Application Tools Preparations: It is applied with a special plastic trowel.
3- APPLICATION:
a) Application Method(s): After the floor is prepared, the material is first spread on the surface with a special trowel. The water on the surface of the absorbing material is stripped and brought to the level of the pattern stones. Then the pattern is given with glaze.
b) Considerations: The "use of tape" in the application of different colors and wide facade applications prevents joint and color problems. Temperatures falling below -5 C during complete drying are dangerous for the health of the material.
4-AFTER APPLICATION:
a) Drying Time: Top drying is completed in 3 hours. The sole dries in 22 hours, while the product dries completely in 7 days.
b) Coloring Time: Coloring process is completed in 24 hours.
c) Storing the Product: After the application process is completed, the lid of the unfinished tin is tightly closed and stored in such a way that it is protected from frost (below -5 C) and extreme heat.
d) Storage of Application Tools: At the end of the work, the application trowel and the roller used for the primer should be cleaned with hot water, if possible, and stored for use next time.
5-CONSUMPTION (CONSUMPTION):
Consumption for 3mm: 3-3,500 kg/m2.
Primer Consumption: 0.200-0.250 kg/m2.
Unit price descriptions of the Ministry of Public Works Item No: 27.558/2. suitable. TS 7847
- Plas'coll Polyester Based Spray Plaster
1) FEATURES:
a) Content: It is a polyester (oil) based, decorative looking, thin and thick textured, waterproof and protective coating material.
b) Uses: Concrete briquettes, bricks, asbestos cement, steel, aluminum surfaces, ceramic tiles, wood chipboard, ytong, etc. It can be easily applied to existing painted and plastered surfaces at any temperature.
c) Colors: Apart from the catalog colors, it can be made in special colors upon request.
d) Packaging: Penitex is offered for sale in 20 kg packages.
2) BEFORE APPLICATION:
a) Floor Preparation: The application surface should be cleaned of dirt, oil, rust, etc.
b) Application Preparations: After the floor is prepared, the application surface should be primed with “Plas'coll Polyester Based Spray Plaster Silicone Primer”.
c) Product Preparation: Plas'coll Polyester Based Spray Plaster should be thinned to be applied with a 20% or 25% gun, 10% or 15% with a roller, depending on seasonal values. The product is applied with a roller or a special compressor gun, according to the desired pattern.
d) Application Tools: The application is made with a roller or a special compressor gun. It can be sprayed on the applied surface with a natural mica special machine, if desired.
3) APPLICATION:
"Using tape" in the application of different colors and in wide facade applications prevents joint and color problems. It is dangerous to approach with fire. The most suitable application temperature range is between -5 and +30 o C (provided that there is no wet ground underneath). In applications outside these temperatures, problems called flow and bagging may occur.
4) AFTER APPLICATION:
a) Drying Time: Top dries 2 hours after the product is applied, dries completely after 8 hours. It gives color after the top dries.
b) Storage of the Product: It should be stored at room temperature of 20-25 C degrees, protected from heat.
c) Storage of Application Tools: After the application with a gun, cleaning the gun, hose and chamber should be done with “Plas'coll Synthetic Thinner”. Otherwise, the drying product will cause blockages. Before the product dries, it should be cleaned with “Plas'coll Synthetic Thinner” on the roll.
Consumption: 0.100-300 kg/m2.
Consumption: 0.800-1.200 kg/m2 depending on the type of surface.
Mica Consumption: 0.100 kg/m2.
Penitex Silicone Primer Item No: 27.560/1
Penitex TSEK Item No: 27.560/2
- Plas'coll Rulotex Textured
1-FEATURES:
a) Contents: It is an acrylic copolymer emulsion based exterior coating material.
With its high quality special acrylic binder, it provides long-term protection of all kinds of buildings against external effects in very different climatic conditions, and provides facades to gain a contemporary and aesthetic appearance. Another unique feature of Plas'coll Rulotex is that it hides previously formed plaster defects.
It is not affected by water after 6-8 hours depending on the weather conditions, the suction condition of the surface and the thickness of the application.
b) Places of Use: It can be used in exteriors of all kinds of buildings, as well as in interiors where a decorative appearance is desired. It is applied on plaster, concrete, prefabricated elements, plaster and chipboard surfaces and old painted and solid surfaces.
c) Colors: There is a special catalog for 12 pastel colors. Apart from the catalog colors, special colors are also available upon request.
d) Packaging: Plas'coll Rulotex is offered for sale in 25 kg packages.
2- BEFORE APPLICATION:
a) Application Preparations: After the floor preparation is completed, “Rulotex Primer” diluted 1/1 with water is applied.
b) Surface Preparation: The application surface must be free of all kinds of dirt, oil and rust.
c) Product Preparation: Plas'coll Rulotex is normally made ready for use without being diluted or by diluting with a maximum of 5% water.
d) Application Tools Preparations: The desired pattern is given with the Plas'coll Rulotexe roller.
3- APPLICATION:
a) Application Shape (or Shapes): The product, which is made ready for use, is applied with a roll in 1 or 2 layers. Thanks to its special structure, many different patterns and appearances can be given to the facades depending on the application tools-equipment and shape.
b) Considerations: "Use of tape" prevents joint and color problems in the application of different colors and wide facade applications.
4-AFTER APPLICATION:
a) Drying Time: Top drying is completed in 2-3 hours and full drying is completed in 24 hours.
b) Coloring Time: After 24 hours of application, the true color of the product appears.
c) Storage of the Product: After the application process is completed, the lid of the tin left unfinished is tightly closed and stored in such a way that it is protected from frost (below -5 C) and extreme heat.
d) Storage of Application Tools: At the end of the work, the application trowel and the roller used for the primer should be cleaned with hot water, if possible, and stored for use next time.
5-CONSUMPTION (CONSUMPTION):
Plas'coll Rulotex Consumption: It covers an area of 1-2.5 m2/kg depending on the application thickness.
Plas'coll Rulotex Item No:25034
TS 7847
- Plas'coll Silicone Facade
a) Contents: Plas'coll Silicone Exterior is a waterproof, vapor permeable exterior paint with silicone dispersion.
It is easy to use, has a high covering ability, has a matte surface, is particularly resistant to ultra violet rays and is resistant to aging due to weather conditions.
b) Applications: It is used in exterior paints and synthetic resin plasters.
c) Colors: 15 matte colors in our catalog and 100 colors from the leaf catalog.
d) Packaging: Plas'coll Silicone Exterior Wall is offered for sale in 20 kg packages.
2- BEFORE APPLICATION:
a) Application Preparations: The surface to be applied should be applied before it dries, provided that the surface to be applied is not thinned with “Silitaç Primer”, on the condition of waiting 3-5 minutes between the layers.
b) Surface Preparation: Dirty and loose textures should be cleaned on the surfaces where Plas'coll Silicone Exterior Primer will be applied for the first time, and a surface should be created on which the paint can hold on glassy and glossy textures. Dusty and weakly textured floors and swelled and dusty parts on old painted surfaces should be cleaned and the floor should be made ready for application.
c) Product Preparation: The product is max. It is diluted by 10% and made ready for use.
d) Preparation of Application Tools: It is applied with a brush or roller.
3- APPLICATION:
a) Application Method(s): Painting should be done at least 24 hours after priming and the waiting time between coats should be 12 hours.
b) Considerations: Paint should not be used at temperatures below +5 C degrees or in case of frost risk.
4-AFTER APPLICATION:
a) Drying Time: Plas'coll Silicone Exterior dries in 1-2 hours at 23 °C and 50% relative humidity and complete drying is achieved in 24 hours.
b) Coloring Time: The product gives color 24 hours after it is applied.
c) Storage of the Product: Plas'coll Silicone Exterior Wall should be stored in a place protected from frost and sun.
d) Storage of Application Tools: After the product is applied, the application tools and equipment should be cleaned thoroughly with water and removed.
5-CONSUMPTION (CONSUMPTION):
1 liter With Plas'coll Silicone Exterior, an area of 12 m2 is painted in one coat, depending on the surface.
TS 5808