Description: It is a two-component, urethane-based top coat paint that is extremely resistant to water, moisture, acid, alkali, salt water, mineral oils, chemical solvents, outdoor weather conditions and SO 2 . Its appearance is bright.
Areas of Use: All kinds of industrial facilities, petrochemicals and refineries, valuables, machine parts, etc. used in places.
Amount of Solid Matter: 58% + 3 (By Weight)
Specific Gravity: 1.15 + 0.1 gr/cm3
Product Preparation: Part 2 A. Comp. with 1 Part B. Comp. is mixed. This mixture should be used within 8 hours.
Thinning: Plas'coll Polyurethane Topcoat Paint is reduced to the appropriate viscosity with a special polyurethane thinner.
Method of Application: The drill is done with a gun.
Drying Time (at 20°C): First drying: 0.5-1 hour
Final drying: 4-5 hours
Chemical curing: 24 hours
Consumption: An average of 12-14 m2 area can be painted with 1 liter.
Storage: It should be stored in a closed place, out of direct sunlight.
Considerations: The fire hazard class is II according to the Swedish standard. Since it is a flammable material, it should be kept away from naked flames and should be worked in ventilated environments.
Packaging: A. Comp. in 20/1 tin
- Comp. in 10/1 tin
- Plas'coll Polyurethane Fireproof Intermediate Floor
PROPERTIES:
a) Contents: It is a two-component, polyurethane resin-based semi-matte paint. It dries with reaction. It has a fire retardant feature thanks to the phosphate compounds it contains.
b) Places of Use: It can be used easily in chemical plants in extremely acidic or basic environments, in related parts of structures that need to be cleaned frequently, in special machinery, equipment and structures that require mechanical resistance, and in clean rooms. PLAS'COLL POLYURETHANE MODIFIED ARAKAT PAINT , which can be formulated and diversified after chemical and physical determination, is basically produced in 2 types.
Type1: Plas'coll Polyurethane Modified Fireproof Paint for structures, metal and wood surfaces
Type2: Antistatic type for the same surfaces
- Colors: It is produced in 5 main colors as gray, white, black, o.yellow, o.red.
and the desired RAL colors can be produced.
d)Packaging: It is as written on it according to its functionality.
- BEFORE APPLICATION:
- a) Surface and application preparations: The surfaces to be applied must be free of all kinds of dirt, oil, rust and moisture. Volatile surfaces are transformed into fixed surface systems by spatula, sandpaper or more stubborn roughnesses by sanding, grinding and wiping methods. The most suitable dust removal and cleaning method is air and water. Another point to be considered is that the surface is free from moisture. For positive results, metal surfaces are treated with phosphating and antioxidant material before application.
- b) Product preparation: A and B components are given as a set. What needs to be done is to thoroughly mix A and B in the given amounts. A hand mixer can be used for this job. Since the material mixture will start to show an exothermic gel after 20 minutes, it is generally recommended to be consumed between 1.5 and 2 hours; otherwise, material losses or application difficulties may occur. If the mixed amount is too much for the area where the material will be applied, small mixtures made with the ratios specified on the products will solve the problem. The product is thinned with the special PLAS'COLL POLYURETHANE THINNER according to the tool to be applied. PLAS'COLL POLYURETHANE MODIFIED INTERMEDIATE PAINT (first coat) must be applied to the surface to be applied, and a drying time of 1 day must be given.
- c) Preparations for application tools: Brush, roller or gun ready, free from water
APPLICATION:
- Application method (or forms): The material prepared for use should be consumed within 2 hours at the latest. It can be applied by bringing it to the appropriate consistency with the help of a brush, roller or gun.
- Points to note: Approaching the product with fire is dangerous. In case of contact with skin and eyes while working with the product, immediate cleaning with water is highly recommended. For detailed material warning information, please refer to the epoxy and polyurethane material warning information sheet.
AFTER APPLICATION:
- a) Drying time: (20 C) First drying: 1-1.5 hours. Final drying: 4-5 hours. Chemical curing: 24 h.
- b) Storage of the product: The product has a 6-month stock life as the A and B components in which it is sold.
- c) Storage of application tools: The product that hardens as a result of chemical reaction may harden on the application tools and cause that tool to not be used again.
CONSUMPTION: Depending on the applied surface and the method of application, 1 lt. PLAS'COLL PI 5-6 m2 can be painted with a modified ARAKAT