Boxes
Boxes, which make up Weidmüller's wide range of products, offer a wide variety of electrical connections and components.
It was designed to protect it from conditions and harsh environmental conditions and was put into use after being tested under these conditions.
Klippon K Aluminum Cans
K series aluminum cans have many application areas. K series boxes include terminals, switches, buttons, indicators and electronics.
components can be mounted.
Properties:
• 19 different sizes as 2 types
• Stainless steel cover screws
• Mounting holes are insulated from inside the box
• Drilled screw threads for rails and other mounting plates
• IP 66, IP 67 and IP 68 protection class
• It can be used in conditions such as rain, melted snow and dew.
It can be used in industry and transportation. It also complies with ATEX standards.
It can be used in potentially explosive atmospheres.
Klippon POK Polyester Boxes
Reinforced POK series with glass fibers
polyester boxes are used both indoors and outdoors.
it is suitable for use.
Properties:
• 17 sizes as 2 types
• Stainless steel cover screws
• Mounting holes are isolated from inside the box
• Drilled screw holes for rails and other mounting plates
• IP 66 Protection class
These boxes are especially high protection against corrosion and impact.
They are preferred in applications requiring class.
Cable Glands
They are produced with different designs from different materials for different applications.
• Can be used in controllers
• They are made of plastic, brass or stainless steel
• EMC protection
• EN 50014, EN 50019 and ATEX compliances for explosive atmospheres
• VDE-, CSA- and UL- conformities
The unions can be mounted on the threads drilled on the box, or they can be mounted by tightening them with a nut.
Installation in hazardous environments should be done in accordance with CENELEC EN 50014 – 50018 – 50019.
• Elevated safety norm EN 50019, from the inside of the box besides the screw threads entering the box.
Requires fastening with nut.
• Norm EN 50018 is protected against flames and the screw threads must enter the box with at least 5 turns.
Unused holes should be covered with a certified cap.
In addition, stainless steel and polycarbonate boxes are produced.