The existing system information is transferred to the main control unit with the help of HUB, the wiring systems of seat sensors and seat belt sensors placed in the seats in school buses. The transferred system information is displayed on the screen. There is software on the screen that visually displays the vehicle seat array and seat occupied/empty information. can see the seat occupancy and whether the belts are fastened. After reaching the destination of the school bus, if any student is forgotten in the shuttle bus, the alarm system is activated. It warns the driver by giving an audible and visual warning on the screen. and then Thirdly, the horn of the vehicle is activated. The system continues to flash the Flashers, and the horn of the vehicle continues to sound until the ignition of the service vehicle is turned on.