It is desirable that the pipe materials used in sewage systems are not corroded and resistant to chemicals. Aggressive chemicals found both in wastewater and in the soil have damaged the pipe material in the existing sewerage networks. Since polyethylene raw material is a corrosion resistant material, it is the ideal pipe material for long-lasting sewer systems. It can also be used for the storage and transfer of chemicals.
Ease of storage and transportation with telescopic stacking
Corrugated pipes are very light and at the same time resistant to impacts. There is no wastage during transportation and stocking. Since it is light, it can be easily put together and stored or transported.
Easy joining methods
Corrugated pipes are combined with a bush seal or with a sleeve seal. Head-tying can be done easily in any construction site environment. Due to its lightness in all kinds of horizontal-vertical transportation at the construction site, the need for construction equipment is minimal.
Ease of laying
Since the corrugated pipe is light, heavy equipment is not needed during laying. Thanks to its easy joining methods, the laying speed is higher than other pipe materials. It is a pipe material used especially in urban construction sites and in areas where the construction season is short.
Sealing
In systems where the jointing method with a bell seal and sleeve seal is applied, sealing is ensured up to 0.5 bar pressure. In this way, sewage wastes do not spread to groundwater and thus our environment is protected. In addition, in places with high ground water, outside water entry into the sewer system is prevented. This prevents the line from overfilling and overflowing.
Ease of repair and maintenance
The inner surface of the corrugated pipe is produced in a light color, allowing camera control into the sewer network when desired.
Long life
The design life of corrugated pipes is minimum 50 years. For this reason, operation and maintenance costs are minimal.
Smooth flow surface
Since the hydraulic roughness of corrugated pipes is very low compared to other pipe materials, a lower diameter can be selected and used by optimizing the diameter in the sewer system. Thus, the project cost of laying at the construction site can be reduced compared to the concrete pipe. In addition, the smooth surface prevents the solid particles in the system from adhering to the inner surface of the pipe, and the narrowing of the cross-section that may occur over time is prevented.
It is flexible
Since corrugated pipes are flexible, they adapt to ground movements and do not deform.
During the production of the desired length, breakage and losses are zero.
Muffed pipes are produced in standard 6 m lengths. Pipes without bell can be produced in the desired length according to customer demand.
