Homepage ›› Companies ›› Kerim Dede Guven ›› Automatic Lubrication System

Kerim Dede Guven
Company Description Products Contact Informations Send Message

Adres: CEVAT DÜNDAR CAD. 15 26

Tel 1: 0 (312) 385 08-56

Faks: 0 (312) 385 41-30

Email 1: info@bilmakelektrik.com

Web: http://bilmakelektrik.com/index.php

Automatic Lubrication System

Automatic Lubrication System

Secure your machinery and facilities with INTERLUBE Central Lubrication Systems
Your construction machinery and facilities are working in difficult environmental conditions...

By using Interlube central lubrication systems, you can provide systematic lubrication of the bearings of your work machines, carriers, crusher plant or asphalt plant.

Abrasive and corrosive elements such as sand, gravel, and water significantly reduce the service life of expensive bearings and connections of your machines and cause unexpected failures. In addition to the cost of troubleshooting, you may face the risk of not fulfilling your commitment on time due to these malfunctions.

While you concentrate on your work, Interlube central lubrication systems will protect your equipment's bearings with the right amount of grease with its power and robust structure.
Usage areas:
  • Construction Machinery
  • Truck Groups
  • Articulated Carriers
  • Crusher Construction Sites
  • Ready Mixed Concrete Production Facilities
  • Concrete Pumps
  • Asphalt Production Facilities


ACI is designed for chassis lubrication of commercial vehicles. Up to 12 lubrication points can be connected. It works with 12/24 Volts.

 AC2 It is designed for chassis lubrication in truck and lorry group. It is also used in concrete pumps and application areas where lubrication up to 36 points is required. It works with 12/24 Volts.

It has the ability to lubricate up to 60 points with its 3 liter grease reservoir. 1 cc/30 min. It can be used in heavy conditions where high lubrication is required with its feeding capacity. It includes 9 different timer selections. The crusher can be used in certain parts of construction sites, asphalt plants, concrete plants and work machines.

  • Ability to work with 12/24 Volt
  • 3 Liter reservoir volume
  • Ability to work with AE 80 to NLGI 2 grease
  • -30°C to +40°C operating range
  • Optional low grease level sensor
  • Lubrication up to 60 points
  • Independent lubrication channels
  • Adjustable different pumping intervals





It safely distributes the desired amount of grease by means of electrically driven piston pump, 12/24Volt DC control unit and progressive distribution blocks. It can serve up to 3000 hours with its 3.6 and 9 liter grease reservoir. It can be preferred at any point where lubrication is required under heavy construction site conditions.
  • Ability to work with 12/24 Volt
  • IP67 control unit
  • 3.6 and 9 Liter reservoir volume
  • Ability to work in grease range from SAE 80 to NLGI 2
  • Modular progressive distribution blocks
  • -30°C to +40°C operating range
  • low grease level sensor
  • Fault signal
  • Adjustable different pumping intervals
Get Info
Maden ve Çimento Sanayi Makineleri