SHOOTING RANGE STAGES

Walls and Ceiling

Mounted with aluminum panels with a special insulation material with sound dampening and anti-rebound feature.
is done by. Damaged parts in small parts can be replaced with a new one if desired.

Ground

Pressed rubber plates of 50x50x5 cm size are laid on the self-leaving screed (10cm), and 6 layers of epoxy coating are placed on it.
is done. It is intended to minimize projectile bounces. When requested, the cost of the damaged area will be low.
replaceable.

Ventilation

In order to quickly and easily evacuate the gunpowder gas accumulated inside and the lead vapor settling on the ground during the shooting, it can be drawn from different points depending on the polygon size.
Suction and blowing is done in a way to be done. It is aimed that the air in the range will change at least 26 times per hour.

Fire Alarm Systems

The whole shooting area is equipped with smoke and gas sensors, alarm barriers, emergency exit door and fire at certain points.
extinguishing cabinets and devices are made with fire detection and extinguishing devices with address location.

Bullet Trap and Armoring

10mm thick armor steel that does not deform even with a rifle cartridge in places where armoring is required and in bullet traps
is used. With the special design made, it has been made impossible for the bullet to bounce back or to the left or right.

Shooter Bench

Shooting Target System

Cool Shot

Laser Shooting

Fixed Target

Moving Target

Interactive Shooting

Lighting

All luminaires used have exproof feature. The amount of lighting is in line with international standards.

Fire Control Room and Camera Recording System

a. A safe area is created with the front wall reinforced with bulletproof glass and steel sheets.
b. Through wireless headphones, the shooting manager has the opportunity to meet with all shooters at the same time or with any shooter he wants.
It is designed to have
NS. The shooting manager communicates with the shooters thanks to the audio broadcast system, the shooter preparation line upstairs and the post-shooting maintenance line.
It is designed to be able to communicate.
D. Thanks to the front and rear cameras, you can zoom to the desired point or the entire shooting area.
It is possible to take image records of all the shots made by viewing them.
to. With a special program installed on the main computer, the control of the safety elements and electrical systems is completely from here.
is done. It is created in a locked warehouse where the materials to be used are located.