main structure

The trailer has 3 axles, air suspension, 45 tons of carrying capacity and 10000 mm from the back of the gooseneck Workplace width 3050 mm Platform height 1050 mm

Flat platform trailer will be manufactured for paver transport.

Material

ST A1 52 ereğli steel will be made of iron and steel product sheet.

main chassis and

Camel neck

The lower and upper blades of the main chassis are in the form of 20 mm middle strut and 16 mm I-section.

It is welded from side to side by gas arc welding. Gooseneck will use the same material properties. Intermediate traves will be manufactured from special ST 37 press bending. There will be a gooseneck and side opening type cover.

Vehicle Capacity

Spring load 45 tons

Flooring

2,3 checkered sheet metal will be laid between the two chassis of 8 cm hornbeam, the sides of which are baked.

Undercarriage

There is a shock absorber that limits the vibrations with air suspension parabolic z scissors and a ramp arm to adjust the level.

Axle Tops

It is flat and welded to a 40x10 blade to prevent machine slippage.

Brake system

Abs (wapco) system.

tires

It is 295 60 R 22,5 12+1 and E certificated tires will be fitted.

Electrical Installation

European norms and standards, "Turkish Standards Institute" to be appointed as appropriate.

Accessories

Ramp

Manual heavy load feet will be placed on the reflector gooseneck assembly, spare wheel place, and rings on the sides. Gooseneck part and sides are 500 mm high with a cover.

Hydraulic pump driven, dual hydraulic cylinder and electrically operated lowering

Remote controlled or mechanical on the overlay ramp

Paint

1 coat of epoxy primer 2 coats of topcoat Acrylic paint will be painted in the desired color and pattern.