Hydraulic and Pneumatic System Distributor Technical Specifications:

Asphalt distributor tank 12 m3 - 16 m3 4 mm dkp black steel sheet top walking platform diamond-shaped sheet metal walking ladder and handrails, overflow and circulation pipes, thermal insulation 5 cm rapitz wire mattress type rock wool, insulating sheet 0.70 mm galvanized sheet

Asphalt distributor heating pipes are 8 and double row. There is a hell hole in the burner mouths.

Pi-tu output will be taken from the vehicle transmission and will be controlled from the cabin by means of the pneumatic piston.

Hand throttle will be fitted to the vehicle. With the help of the sensors on the pump and shaft, the vehicle speed and the laying will be directly proportional.

The spray bar (spreader) consists of 300 cm and has 30 valve arrangements. These valves are arranged with a spacing of 10 cm and there are 18 valves on the main bar and 6 charge valves on the side folds.

The main body can be controlled by means of 3 pistons and the side folds can be controlled pneumatically by means of one piston, from the cabin and from the panel in the rear system or with a mobile hand control. The brass nozzles on the valves lay in the form of crow's feet.

The spray bar can be manufactured in a longer and more segmented form upon request.

The butterfly valve in the system acts as a pressure control valve and helps a successful paving.

Asphalt tank bottom valve and pump has a capacity of 60 m3/h and has the ability to suck from outside, deliver goods out and circulate on its own with its three-way on-off system.

The lower valve can be controlled from the cabin by means of a pneumatic piston and from the panel in the rear system or with a mobile hand control.

Alarko alm 14 type burner is used as asphalt tank heating system. The burners operate through the generator in the system and heat is obtained automatically in the desired degree range by means of the thermostat.

6 m imported steel spiral hose for filling and discharging (record and gooseneck)

Other fasteners in the asphalt distributor system: hydromotor and pump, oil tank. burner fuel tank, 3 x 2 ½ three-way valves, 2 adapters and blind plugs, 2 heat indicators and float