1-FEATURES:
a) Content (Contents): It is a solvent-based primer that dries quickly in the air and is resistant to physical and chemical effects. Contains anticorrosive pigments. It adheres to the surface very well, is elastic and aesthetic. It has low moisture permeability. The zinc chromate pigment it contains gives a structure that can be used easily in all branches of heavy industry, at a level that will increase the light fastness and heat resistance of the paint.
b) Places of Use: It is used on the desired iron construction and sheet surfaces of industrial facilities, residences and all kinds of marine vehicle structures for resistance to corrosion.
c) Colors: It can be made in gray, red, yellow, blue and other desired special colors.
d) Packaging: Plas'coll Zinc Chromate has been put on the market in 25 kg packages.
2- BEFORE APPLICATION:
a) Floor Preparation: The application surface should be free of dirt, rust and oil.
b) Product Preparation: Plas'coll Industrial Anticorrosion Paint is thinned by 15-20% with “Plas'coll Industrial Thinner” and made ready for application.
c) Application Tools Preparations: The application is applied with an air gun.
3- APPLICATION:
a) Application Method (or Forms): After the material is brought to the appropriate viscosity, it is applied with a gun, brush or dipping systems.
b) Considerations: Due to the presence of easily volatile solvents in the system, adequate ventilation should be provided and open flames and high heat should be avoided in practices to be carried out in closed environments.
4-AFTER APPLICATION:
a) Drying Time: Dust-free drying: 5-10 minutes Touch-drying: 10-30 minutes at 20°C
b) Storage of the Product: After the application process is completed, the part that has not been thinned can be stored for a long time in its own tin by tightly closing the small lid.
c) Storage of Application Tools: At the end of the work, the application tool should be cleaned with “Plas'coll Industrial Thinner”.
5-CONSUMPTION (CONSUMPTION):
It occupies at least 10 m2/lt area in a single layer.
- Plas'coll Industrial Antirust
1-FEATURES:
a) Content (Contents): It is a solvent-based primer that dries quickly in the air and is resistant to physical and chemical effects. Contains anticorrosive pigments. It adheres to the surface very well, is elastic and aesthetic. It has low moisture permeability.
b) Places of Use: It is used on the desired iron construction and sheet surfaces of industrial facilities, residences and all kinds of marine vehicle structures for resistance to corrosion.
c) Colors: It can be made in gray, red, yellow, blue and other desired special colors.
d) Packaging: Plas'coll Industrial Antirust has been put on the market in 25 kg packages.
2- BEFORE APPLICATION:
a) Floor Preparation: The application surface should be free of dirt, rust and oil.
b) Product Preparation: Plas'coll Industrial Anticorrosion Paint is thinned by 15-20% with “Plas'coll Industrial Thinner” and made ready for application.
c) Application Tools Preparations: The product is applied with an air gun.
3- APPLICATION:
a) Application Method (or Forms): After the material is brought to the appropriate viscosity, it is applied with a gun, brush or dipping systems.
b) Considerations: Due to the presence of easily volatile solvents in the system, adequate ventilation should be provided and open flames and high heat should be avoided in practices to be carried out in closed environments.
4-AFTER APPLICATION:
a) Drying Time: Dust-free drying: 5-10 minutes Touch-drying: 10-30 minutes at 20°C
b) Storage of the Product: After the application process is completed, the part that has not been thinned can be stored for a long time in its own tin by tightly closing the small lid.
c) Storage of Application Tools: At the end of the work, the application tool should be cleaned with “Plas'coll Industrial Thinner”.
5-CONSUMPTION (CONSUMPTION):
It occupies at least 10 m2/lt area in a single layer.
- Plas'coll Industrial Topcoat
1-FEATURES:
a) Ingredients: It is an air-drying topcoat paint that dries very quickly. It looks shiny.
b) Applications: It is used in all kinds of steel parts such as construction machinery, hand and agricultural tools, pipes, boilers, radiators, water tanks, in various industrial facilities, in the steel constructions of facilities such as bridges, hangars and warehouses.
c) Colors: Apart from the desired RALL colors, special colors are also produced upon request.
d) Packaging: Plas'coll Industrial Topcoat was launched in 20 kg packages.
2- BEFORE APPLICATION:
a) Surface Preparation: The surface to be applied must be free of all kinds of oil, dirt, rust, etc. things must be cleared.
b) Product Preparation: Before the material is used, it is diluted with “Plas'coll Industrial Thinner” to the appropriate viscosity and made ready for use.
c) Application Tools Preparations: The application should be done with a gun.
3- APPLICATION:
a) Application Shape(s): After the material is brought to the appropriate viscosity, it is applied with a gun, brush or dipping systems.
b) Considerations: Due to the presence of easily volatile solvents in the system, adequate ventilation should be provided and open flames and high heat should be avoided in practices to be carried out in closed environments. When the toxic effect is seen, a doctor should definitely be helped.
4-AFTER APPLICATION:
a) Drying time (20 C): Initial drying: 15-20 minutes, Final drying: 2-3 hours
b) Storing the Product: After the application process is finished, the part that has not been thinned should be kept in its own tin by closing the small lid well.
c) Storage of Application Tools: At the end of the work, the application tool should be washed with Plas'coll Industrial Thinner and removed.
5-CONSUMPTION (CONSUMPTION):
8-10 m2 area can be painted with 1 liter.
- Plas'coll Industrial Semi Matte
1-FEATURES:
a) Content (Ingredients): It is a solvent-based semi-matt topcoat paint that dries quickly in the air and is resistant to physical and chemical effects. Contains anticorrosive pigments. It adheres to the surface very well, is elastic and aesthetic. It has low moisture permeability.
b) Places of Use: It is used on the desired iron construction and sheet surfaces of industrial facilities, residences and all kinds of marine vehicle structures for resistance to corrosion.
c) Colors: It can be made in gray, red, yellow, blue and other desired special colors.
d) Packaging: Plas'coll Industrial Semimat was launched in 20 kg packages.
2- BEFORE APPLICATION:
a) Floor Preparation: The application surface should be free of dirt, rust and oil.
b) Product Preparation: Plas'coll Industrial Half Matte Paint is thinned by 15-20% with “Plas'coll Industrial Thinner” and made ready for application.
c) Application Tools Preparations: The product is applied with an air gun.
3- APPLICATION:
a) Application Method (or Forms): After the material is brought to the appropriate viscosity, it is applied with a gun, brush or dipping systems.
b) Considerations: Due to the presence of easily volatile solvents in the system, adequate ventilation should be provided and open flames and high heat should be avoided in practices to be carried out in closed environments.
4-AFTER APPLICATION:
a) Drying Time: Dust holding dry: 5-10 minutes
Touch dry: 10-30 minutes at 20°C
b) Storage of the Product: After the application process is completed, the part that has not been thinned can be stored for a long time in its own tin by tightly closing the small lid.
c) Storage of Application Tools: At the end of the work, the application tool should be cleaned with “Plas'coll Industrial Thinner”.
5-CONSUMPTION (CONSUMPTION):
It occupies at least 10 m2/lt area in a single layer.
- Plas'coll Oven Topcoat
1-FEATURES:
a) Content (Ingredients): It is an oven drying, melamine-formaldehyde modified topcoat paint. Its appearance is bright.
b) Areas of Use: It is used for dyeing household goods, machine and car parts, agricultural tools, etc. materials.
c) Colors: It can be made in gray, red, yellow, blue and other desired special colors.
d) Packaging: Oven Paint has been put on the market in 20 kg packages.
2- BEFORE APPLICATION:
a) Application Preparations: Before using the material, it should be primed with “Plas'coll Kiln Primer”.
b) Ground (surface) Preparation: The surfaces to be applied must be free of all kinds of oil, dirt, rust, dust and moisture.
c) Product Preparation: Before the material is used, it is thinned with a special oven thinner and prepared for application.
d) Application Tools Preparations: The application should be done with a gun.
3- APPLICATION:
a) Application Method(s): The surfaces applied with a brush, dipping or spray gun are applied either by keeping them in ovens at 120 C degrees for different periods or by drying in air-drying environments, depending on the structure of the industrial facility.
b) Considerations: Due to the presence of easily volatile solvents in the system, adequate ventilation should be provided and open flames and high heat should be avoided during the exercises to be carried out in closed environments. In the absence of complete drying on the floors where the furnace primer forms thick films, problems may arise in the furnace paint systems if suitable solvents are not used.
4-AFTER APPLICATION:
a) Drying Time: It is baked at 120 C degrees for 30 minutes. It should be left in the air for 15 minutes before being put into the oven.
b) Storage of the Product After the application process is completed, the part that has not been thinned can be stored for a long time in its own tin by tightly closing the small lid.
c) Storage of Application Tools: At the end of the work, the gun should be cleaned with “Plas'coll Oven Thinner”.
5-CONSUMPTION (CONSUMPTION):
An average of 14-18 m2 area can be painted with 1 liter of Plas'coll Oven Paint.
- Plas'coll Matte Decoration Paint
1-FEATURES:
a) Content (Ingredients): It is a synthetic based decorative paint with silk matte shine. Matte decoration paint creates a hard and durable film that dries quickly, has excellent coverage, does not leave brush and roller marks, is easy to wipe, does not leak. With its silk matte appearance, a wide color palette can be obtained in pastel tones, either as a stand-alone topcoat or by adding Lux and Enamel paints.
b) Application Areas: Widely used as a topcoat, especially for interior walls and mineral surfaces such as wood, metal, concrete, gas concrete, plaster, brick and gypsum, and also as intermediate coat paint of Synthetic Lux and Enamel paints on interior and exterior surfaces. has area.
c) Colors: White and pastel colors.
d) Packages: Plas'coll Matte Decoration paint is offered for sale in 25 kg packages.
2- BEFORE APPLICATION:
a) Application Preparations: Before the application, the dry and clean surface should be primed with “Plas'coll Synthetic Primer”.
b) Floor (surface) Preparation: The surface to be applied must be cleaned of all kinds of oil, dirt and rust.
c) Product Preparation: Depending on the application, 5-10% of “Plas'coll Synthetic Thinner” is added to make the product ready for use.
d) Application Tools Preparations: The application should be done with a pistol, brush or roller.
3- APPLICATION:
a) Application Method (or Forms): The product, which is ready for application, should be applied in 1-2 layers. It's helpful to spend a night between floors.
b) Considerations: The product should be kept away from flame and high heat.
4-AFTER APPLICATION:
a) Drying Time: (at 20 C) Dry to the touch: 1-2 hours
Dust holding dry: 4-5 hours
Hard drying : 12-16 hours
b) Storing the Product: After the painting process is finished, the package of the paint should be closed tightly in an airtight manner and the package should be shaken upside down and stored in that way.
c) Storage of Application Tools: At the end of the work, application tools and equipment should be made with “Plas'coll Synthetic Thinner”.
5-CONSUMPTION (CONSUMPTION):
1 liter At least 10 m2 area can be covered in one coat with paint.
TS 39
- Plas'coll Synthetic Antirust
1-FEATURES:
a) Content (Ingredients): It is a solvent-based, air-drying, anti-rust primer. It contains anticorrosive pigments, adheres very well to the surface, has aesthetic, elastic and low moisture permeability.
b) Application Areas: It is used on iron construction and sheet metal surfaces of industrial facilities, residences and all kinds of marine vehicles and structures where corrosion resistance is required.
c) Colors: Apart from gray, red and green colors, it is made in special colors upon request.
d) Packaging:Plas'coll Anticorrosion paint is offered for sale in 1 kg, 5 kg and 20 kg packages.
2- BEFORE APPLICATION:
a) Surface (surface) Preparation: The application surface must be free of dirt, rust and oil.
b) Product Preparation: Plas'coll Anticorrosion Paint is diluted to the appropriate viscosity by adding 5-10% “Taç Synthetic Thinner” for brush and roller, 15-20% for spraying, and is made ready for use.
c) Application Tools Preparations: The product should be applied with a brush or roller.
3- APPLICATION:
a) Application Method (or Forms): The product can be applied alone in two layers with 8-12 hour intervals, or an excellent corrosion resistance is achieved by applying Plas'coll Lux or Enamel synthetic topcoats on it after 8-24 hours.
b) Considerations: Due to the presence of easily volatile solvents in the system, adequate ventilation should be provided and open flames and high heat should be avoided during the exercises to be carried out in closed environments.
4-AFTER APPLICATION:
a) Drying Time: Depending on the ambient conditions; Touch Dry: 1-3 hours
Dust Removal Dry: 4-5 hours
Hard Dry: 12-16 hours
b) Storing the Product: After the painting process is finished, the packaging of the paint should be closed tightly in an airtight manner and the packaging should be shaken upside down and stored in such a way.
c) Storage of Application Tools: At the end of the work, the application tools and equipment should be cleaned with “Plas'coll Synthetic Thinner” and removed.
5-CONSUMPTION (CONSUMPTION):
It occupies at least 10 m2/lt area in a single layer.
TS 39
- Plas'coll Synthetic Primer
1-FEATURES:
a) Content (Ingredients): It is a solvent-based, air-drying paste. It is used to obtain a smooth surface before the topcoat paint.
b) Applications: It is used in wood, plaster, concrete and prefabricated construction elements.
c) Packaging: Plas'coll Primer Paint is offered for sale in 1 kg, 5c kg and 20 kg packages.
2- BEFORE APPLICATION:
a) Floor (surface) Preparation: The surface to be applied is cleaned by using sandpaper and spatula in order to get rid of all kinds of roughness, oil and dirt.
b) Product Preparation: Plas'coll Primer Paint can be used without thinning, optionally it can be diluted with 5-10% Plas'coll Synthetic Thinner and made ready for use.
c) Application Tools Preparations: Brush and roller.
3- APPLICATION:
a) Application Method (or Shapes): Plas'coll Primer Paint is applied easily with a spatula if it is not thinned, and with a brush and roller when it is thinned.
b) Considerations: The product should be kept away from open flame and high heat.
4-AFTER APPLICATION:
a) Drying Time: Full drying is provided in 24 hours.
b) Storing the Product: After the painting process is finished, the packaging of the paint should be closed tightly in an airtight manner and the packaging should be shaken upside down and stored in such a way.
c) Storage of Application Tools: At the end of the work, the application tools and equipment should be cleaned with “Plas'coll Synthetic Thinner” and removed.
5-CONSUMPTION (CONSUMPTION):
10 m2/lt as primer in one coat. 4-8 m2/lt as paste. occupies area.
TS 39
- Plas'coll Synthetic Topcoat
a) Content (Ingredients): It is a solvent-based, air-drying, non-yellowing, easy-to-apply, very bright topcoat paint that is resistant to interior and exterior conditions.
b) Areas of Use: It can be used safely on wooden, iron construction and sheet metal surfaces in residences, offices and industrial buildings, land and sea vehicles, agricultural equipment and machinery.
c) Colors: White and 14 bright colors.
d) Packaging: Plas'coll Lux Synthetic Paint was launched in 5 kg and 20 kg packages.
2- BEFORE APPLICATION:
a) Application Preparations: Metal surfaces should be saturated with Plas'coll Antirust or Sülyen, wooden surfaces should be saturated with Plas'coll wood preservative and primed with "Plas'coll Synthetic Primer".
b) Floor (surface) Preparation: The surfaces on which the application will be made must be cleaned of all kinds of oil, dirt, rust, dust and moisture, and the old solid painted surfaces must be matted with sandpaper.
c) Product Preparation: Plas'coll Lux Synthetic Paint is made ready for use by thinning with 5-15% “Plas'coll Synthetic Thinner” depending on the application.
d) Application Tools Preparations: Plas'coll Lux Synthetic Paint is applied with a brush, roller or spray gun.
3- APPLICATION:
a) Method of Application (or Forms): The product, which is ready for use, should be applied in two layers with an interval of one day.
b) Considerations: The lid of the box should not be left open after use; should be kept away from heat and flame.
4-AFTER APPLICATION:
a) Drying Time: Depending on the ambient conditions;
Touch Dry : 1-3 hours
Dust Free Drying : 4-5 hours
Hard Drying : 12-16 hours
b) Storing the Product: After the painting process is finished, the packaging of the paint should be closed tightly in an airtight manner and the packaging should be shaken upside down and stored in such a way.
c) Storage of Application Tools: After cleaning and drying with “Plas'coll Synthetic Thinner”, the usage tools and equipment should be removed.
5-CONSUMPTION (CONSUMPTION):
It covers an area of 10 m2/lt in a single layer.
TS 39
- Plas'coll Semi Matte Satin
1-FEATURES:
a) Ingredients: Plas'coll Semi Matte Satin Paint is a silk glossy, synthetic, decorative topcoat paint. It is easy to clean, durable and long lasting.
b) Places of Use: Houses, offices, factories, etc. places, plaster, plaster, wood, brick, sheet metal, chipboard, etc. Used on surfaces and furniture.
c) Packaging: The product has been put on the market in 20 kg packages.
2- BEFORE APPLICATION:
a) Application Preparations: Before the application, the dry and clean surface should be primed with “Plas'coll Synthetic Primer”.
b) Surface Preparation: The surface to be applied should be free from old paint residues, oil, rust, etc. must be free of impurities. Preferably, applications on satin plaster were considered successful.
c) Product Preparation: The paint should be mixed thoroughly before use. According to the application tools, the product should be brought to the application viscosity by thinning with 10-20% “Plas'coll Synthetic Thinner”.
d) Preparations of Application Tools: Product; It should be applied with a roller, brush or airbrush.
3- APPLICATION:
a) Application Method(s): After the product, which is made ready for application, is applied, it should be waited for 24 hours for the second layer application.
b) Considerations: Care should be taken to ensure that the application surface and ambient temperature are above +5 C and the relative humidity is below 80%.
4-AFTER APPLICATION:
a) Drying Time: Depending on the ambient conditions;
Touch Dry : 1-3 hours
Dust Free Drying : 4-5 hours
Hard Drying : 12-16 hours
b) Storing the Product: After the painting process is finished, the packaging of the paint should be closed tightly in an airtight manner, and the packaging should be shaken upside down and stored as such.
c) Storage of Application Tools: After cleaning and drying with “Plas'coll Synthetic Thinner”, the usage tools and equipment should be removed.
5-CONSUMPTION (CONSUMPTION):
It covers an area of 10 m2/lt in a single layer.
TS 39