1) FEATURES:

a) Content: It is a water-based, decorative-looking, thin and thick textured, waterproofing and protective coating material.

b) Uses: Concrete briquettes, bricks, cement, steel, aluminum surfaces, wood chipboard, ytong etc. It can be easily applied to existing painted and plastered surfaces at any temperature.

c) Colors: Apart from the catalog colors, it can be made in special colors upon request.

d) Packaging: Plas'coll Spray Plaster Water Based Spray Plaster is offered for sale in 20 kg packages.

2) BEFORE APPLICATION:

a) Floor Preparation: The application surface should be cleaned of dirt, oil, dust, rust, etc.

b) Application Preparations: After the floor is prepared, the application area should be primed with Plas'coll Penitex Primer if needed.

c) Product Preparation: Plas'coll Water Based Spray Plaster should be thinned to be applied with a 20% or 25% gun, 10% or 15% with a roller, depending on seasonal values. The product is applied with a roller or a special compressor gun, according to the desired pattern.

d) Application Tools: The application is made with a roller or a special compressor gun. It can be sprayed on the applied surface with a natural mica special machine, if desired.

3) APPLICATION:

"Use of tape" prevents joint and color problems in the application of different colors and wide facade applications. The most suitable application temperature range is between -5 and +30 ^o C (provided that there is no wet ground underneath). In applications outside these temperatures, problems called flow and bagging may occur.

4) AFTER APPLICATION:

a) Drying Time: Top dries 2 hours after the product is applied, dries completely after 8 hours. It gives color after the top dries.

b) Storage of the Product: It should be stored at room temperature of 20-25 C degrees, protected from heat.

Consumption: 0.800-1.200 kg/m2 depending on the type of surface.