Madoors electromagnetic automatic vehicle traps work on the basis of magnetic magnetization. When the control button is pressed, the magnetic coil becomes electrified, the electrified magnetic copper coiled coil system pulls the trap skewers collection shaft up. The pull-up spindle apparatus presses on the back of the specially designed laser cut trap skewers and lays the trap barrier skewers on the ground throughout the entire trap. The vehicle passes over the tire burst obstacle system. The vehicle that will pass through the entrance, vehicle, etc. Working with automatic electromagnet logic, the skewers do not lift when the trap stops on the barrier. There are 2 sets of photocell security sensors 60 cm in front of the buried axis of the ground trap, 60 cm behind it, or optional loop detector (metal mass detector) upon request. Swelling barrier systems that work with electromagnets work faster than our other products. The skewers close and open in 1 second. It is the fastest closing barrier system used in transition areas requiring high security. Electromagnetic vehicle traps, floor traps, tire punctures, skewer traps are guaranteed for 2 years. All of our products have a 10-year spare part guarantee. Due to the fact that it works with magnetization, there are hardly any parts to malfunction in our systems. For this reason, it will serve you at your entrances without malfunctions for many years, even in heavy use. Our products are manufactured in one piece up to 6 meters. Apart from our skewer traps that are buried in the ground with the electromagnetic magnet type operating logic, our manufacturing options include specially mounted chemical anchors and ground traps without digging above the ground. In case of power failure, it can be manually discharged. Our automatic electromagnetic vehicle traps are completely hot galvanized. It does not rust or corrode by being affected by external environmental conditions in long years of use. It stays as clean as the first day it was installed. There is a special rubber coating on the back of the trap skewers. This rubber coating absorbs the mechanical noises that occur as a result of its fast working . It is 100% silent when it is started and operated with the remote control. It certainly does not make any noise that will disturb the environment. That's why it is also called a silent trap. Our products are products that have proven themselves at the points where they were established and offer trouble-free service. These products offer full security that does not let the user down. It can work together with all transition automation systems. The electrical automation system panel is PLC intelligent relay controlled. Special software can be produced according to user requests. For detailed information, please contact our engineers.