It should detect from one direction. It is attached to the lower part of the band and the material passing over the band is mixed with the crusher etc. from the outside. It detects metals that will damage the machines and gives an illuminated, audible and relay output signal.

- It is used in places where material is carried over the band. The material height above the band should not exceed 150 mm.
- Detection sensitivity Min 30-40 mm and above are metal particles.
- The metal detector control panel has a digital display and the adjustment operations are made by giving a numerical value.
- There is an interference setting menu against negativities such as interference, false alarm, ground and radio signal.
- Metal detector structure is made of DKP sheet and is suitable for impacts and heavy working conditions.
- It is easy to install and does not require structural changes in the carrier system.
- The metal detector warning and warning system is audible or illuminated and does not require a separate connection.
- It can be easily used on tapes attached with Metal Fastener (rivets). Rivet sensor connection is standard and can be retrofitted